Channel Master Titan 2 High Gain TV Antenna Preamplifier Signal Amplifier 7777V3

Description

Titan 2 High Gain Preamplifier | CM-7777V3
The Channel Master Titan 2 High Gain Preamplifier (CM7777V3) will amplify signals received by your antenna. This antenna amplifier is a high gain, low noise preamplifier designed to allow weaker signals at the antenna to be amplified to a viewable strength,
and is only recommended for installations in which
all broadcast towers in all directions are located at distances of
more than 80 miles.
The Titan 2 High Gain Preamplifier is a two part unit, an outdoor amplification unit which is mounted on the mast of your antenna system and an indoor unit which powers the outdoor amplification unit. The indoor unit is stationed indoors and connects to the outdoor unit via coaxial cable.
Important Note:
The Titan 2 High Gain Preamplifier is recommended for professional installers only. Due to the high gain output of this product, it will result in over amplification if not used in the appropriate scenario. Over amplification will cause issues with the television tuner's ability to receive and display some or all channels. In other words, if just 1 signal is over amplified, it'll knock out reception for all channels. In areas that have even 1 strong or medium strength signal present, do not use the CM-7777 Titan 2 High Gain Preamplifier. For most areas of the country where a mix of strong, medium, and weak signals are present, the correct TV antenna signal booster is the
Titan 2 Medium Gain Preamplifier (CM-7778V3)
. It offers a clean and significant boost without the risk of over amplification. For detailed information concerning the range and strength of all local OTA signals present in your area, there are a number of different websites online that offer free OTA signal analysis reporting. You simply enter your street address into their OTA signal analysis tool and it'll provide you with a complete and detailed analysis of all OTA signals within 120+ miles of your exact location.
What’s Included
Titan 2 High Gain Preamplifier
Power Inserter
Power Adapter
U-Bolt
Coaxial Cable (6 FT)
Instruction Guide
Features
Improves Signal Quality
Decreases Pixilation
May Increase Number of Channels
Blocks LTE Interference from 3G/4G/5G Smartphones and Transmitters
Will Support ATSC 3.0, NextGen TV, and 4K Broadcasts when Available
Housing Offers RF Shielding for Reducing Interference
Ultra Low Noise
Gain - 26 dB
Selectable FM Signal Pass-Through
Heavy Duty Rating for Outdoor Use
Mast Mounted for Close Proximity to Antenna
Specifications
Power Supply Input Voltage: 110-240v, AC ~ 50/60Hz, 200mA (Max)
Power Supply Output Voltage: +13.2v DC, 500mA, 6.6W (Max)
Frequency Range: 54 - 700 MHz
Gain: 26 dB
Noise Figure: Typically Less than 2dB
UL Listed: Yes
RoHS Compliant: Yes
Input Return Loss: <-15
Output Return Loss: <-15
Max Input Level: 15 dBmV
Max Output Level: 40 dBmV
FM Trap: 88-108 MHz; >15dB down
Power Consumption: <5W
Operating Temperature: -40 C to 60 C (-40 F to 140 F)
U-Bolt Diameter (Included): 1.875 in
Weight (product): 12 oz
Weight (packaging): 2.0 lbs
Size (product): 5.375W x 3.0H x 3.5L in
Size (packaging): 5.75W x 3.5H x 6.5L in
TM and copyright © 2021 Channel Master, L.L.C.