Channel Master Omni+ Omnidirectional Outdoor TV Antenna with Amplifier Bundle

Description

Amplified OMNI+ Antenna Bundle
This bundle includes the Channel Master Omni+ omnidirectional outdoor TV antenna with mounting bracket and the Channel Master 1-Port HDTV Signal Amplifier.   The TV antenna in this bundle will pick up free OTA broadcast TV signals from all directions up to 50-60 miles away.
OMNI+ Omni-Directional TV Antenna
The Channel Master OMNI+ is an HDTV antenna capable of receiving HDTV signals from broadcast towers located more than 50 miles away. Named for its omni-directional capabilities, the Omni+ can receive signals from all directions simultaneously which reduces the need for precise pointing and eliminates the need to rotate your antenna when towers are located in multiple directions. The OMNI+ was designed in the USA and optimized for reception of next-gen broadcast technologies including ATSC 3.0, 4K and HDR.
1-Port HDTV Signal Amplifier
The Channel Master 1-Port HDTV Signal Amplifier will boost TV signals, increasing the overall signal strength for distribution throughout the home. The 1-Port HDTV Signal Amplifier has a single output port and can be used in HDTV, CATV, off-air, analog and digital RF distribution applications where high performance and reliability are required.
What’s Included
OMNI+ Omni-directional Outdoor TV Antenna
Mounting Bracket
1-Port HDTV Signal Amplifier
6ft Coaxial Cable and Power Adapter
Product User Manuals
Features (OMNI+)
Reception Range
50-60 Miles
Type
Outdoor
CEA Color Code
Yellow, Green, Light-Green
Reception Pattern
Omni-Directional
Built-In Amplifier
No
Coax Cable
Not Included
Installation
Roof, Attic, Mast, Eave, Chimney
Technical Specifications (OMNI+)
Bandwidth
54 to 216 and 470 to 700 MHz
VHF Gain
4.5dB
UHF Gain
4.3dB
Front to Back Ratio
Omni-directional
Return Loss
N/A
Impedance
75 Ohm
Power Supply
N/A
Max Element Width
24.8 in.
Mounting Clamp
Wall Bracket with U-bolt up to 1-3/4 in.
Turning Radius
19 in.
Output Connector
F-type
Wind Resistance
(at 100 mph, no ice) - 2.75  lb
Product Weight
1.6 lb
Features (1-Port HDTV Signal Amplifier)
Improves Signal Quality
Decreases Pixilation on TV Screen
May Increase Number of Received TV Channels From Antenna
Ultra Low Noise (Typically Less Than 2dB)
Single Output Port
Compatible with All TV Antennas
Professional-Grade Quality and Performance
Powder Coated and Weather-Sealed Housing for Superior Corrosion Protection
Will Support ATSC 3.0, NextGen TV and 4K Broadcasts when Available
Patented Digital Seizure Mechanism (DSM) for Superior Center Conductor Retention, Surface Area Contact and Electrical Performance
Specifications (1-Port HDTV Signal Amplifier)
Impedance (Input and Output): 75 Ohm
Connector: F-type
Frequency Range: 54 to 1002 MHz
Gain: 10 dB
Noise Figure: Typically Less Than 2dB
UL Listed: Yes
RoHS Compliant: Yes
Max Output Level: 25 dBmV
Max Input Level: 10 dBmV
Operating Temperature: -40 C to +60 C
Size (Product): 4.25 x 4.5 x 1.0 in
Weight (Product): 10 oz
These items have been tested, certified, and comes with our full standard warranty.
TM and copyright © 2021 Channel Master, L.L.C.
All Rights Reserved